硅胶3D打印系列-医学教具I001

使用说明

1. Take out the IV training arm, and put it on a non-slick table

将训练手背置于光滑的桌面

2-1. Connect stand with skin pad

将皮肤块与支架连接

2-2. Close clamps of stand & skin pad

以夹具将输液管及皮肤块的血管夹紧

3-1. Open the cap of stand

打开支架上的盖子

3-2. Pour blood/water into the stand

将血液/水导入于支架

3-3.Put a towel under the exit of blood vessel

在血管出口处放置毛巾

Instructions for use 使用说明

4-1. Open the clamp of stand

松开支架夹具

4-2. Open the clamp of skin pad

松开皮肤块血管夹具

5. When water is coming out from blood vessel, close the clamp of skin pad

当水从血管出来的时候,关闭皮肤块血管的夹具

操作准备

Instructions for storage 储藏说明

Discharge blood/water from stand and skin pad

清除支架和皮肤块的血管与水

Disconnect stand and skin pad

拆卸支架和皮肤块

Dry the products with towel

用毛巾擦干产品

注意事项

Use needle between gauge 20~23 to extend the life of skin pad

使用20~23规格的针头以延长皮肤块使用周期

Clean the stain of iodine with towel (rinsed by water or alcohol) within an hour

一小时内以水或酒精粘于毛巾上清除碘酒污渍

Do not use strong acid or strong alkali to clean the surface of skinpad

皮肤块表面请勿使用强酸强碱剂清洁

Using non-salt liquid can extend the life of blood vessel

使用无盐份液体可延长血管使用周期

来源: 硬纪园科技